Top 10 Condo Building Problems

Share This Post


Screen Shot 2021 01 06 At 11 19 58 AMWorkmanship, Quality Control & Water…

Probably because I have inspected thousands of condo buildings and their units for construction defects and other issues, I am often asked by both prospective condo buyers and property managers to name the most common problems found in new condo developments. Interestingly enough, new condo buildings have more hidden problems than older facilities whose defects have manifested themselves over time. 

When & Why

A building inspection is like an auditor looking over the books. If no early problems are discovered, the process goes more smoothly. When issues appear early, though, it is a strong indication that a more in-depth investigation is needed. Another maxim: problems are rarely found in the materials and equipment; rather, defects are primarily due to workmanship quality control and water in all its forms.

  1. Grading/Drainage 
    New grading is prone to experience settlement. This often manifests itself in sunken storm drain grates,uneven paved surfaces, cracked sidewalks, driveway surface depressions allowing ponded water, drip-edge ground sloping toward the foundations, etc. Sometimes these problems can only be observed during rain events, but they can also be indirectly discovered from visible soil erosion and dried water strains.Frontsteps
  2. Building Envelope
    The building envelope includes exterior siding materials, doors, windows, and roof surfaces.  As mentioned earlier, water or air infiltration problems are not due to defects in materials but rather improper flashing, poor use of fasteners, and not following the manufacturer’s installation recommendations. A review of the manufacturer’s specifications can be the most productive inspection technique.
  3. Foundation Cracks
    Most foundations use concrete, and concrete shrinks as it cures. Steel or fiber reinforcement is used to control and minimize cracking during the curing process. For this reason, most cracks in concrete are not a sign of structural problems or foundation settlement. Most building engineers can quickly determine the significance of observed cracking. Often water infiltration through the cracks is a greater issue.
  4. Wood Flooring
    Floorboards separating or buckling is a commonly reported problem in newly installed solid wood floors. Assuming the floor has not experienced a recent flooding event, movement of solid wood floors is often due to the installer not allowing the floor to acclimate to the interior’s humidity level. If the floor material is not stored for a few days in the home’s environment prior to being installed, floor movement can result.
  5. Plumbing
    Always turn on the faucets and look under the sink. It’s surprising how many water leaks can be found with just this simple exercise. One of the most common problems discovered is the improper reversal of the hot-and cold-water piping.
  6. Ventilation Ducts
    Ductwork is not always sealed during construction, resulting in dust and debris from operations settling in the ducts. Ducts full of dust and debris should be cleaned by a professional.
  7. Paint
    Though full paint coverage may be called for in the specifications, sometimes tightened schedules and poor supervision allow areas such as basements, closet ceilings, and other less visible spaces to be overlooked. Paint surfaces should always be inspected with a strong light applied at an angle. Painting irregularities, called “holidays,” can often only be seen using this method.
  8. Systems
    Modern systems require final reviews to determine if they are operating within their design parameters.  his may include a review of the balancing report, use of anemometers to measure airflow, and temperature readings at floor and wall registers. Room temperature controls can be adversely affected when placed where direct sunlight can reach them. Hotwatertank
  9. Unauthorized Substitutions
    A review of the project specifications can reveal inferior material or equipment has been substituted. This is typically done to save the developer money. Whether the substitution is equal or better than first specified is often a subjective matter, but still should be judged to be acceptable by the intended user.
  10. Incomplete work
    This issue can take on many forms, but the most important is life safety issues. This includes adequate fire sprinklers, fire-stopping seals around pipes and conduit, and code required fire separation. Fire alarms and CO2 detectors should be tested.

When in doubt contact your engineer! Remember you are not alone if you are experiencing one of these top 10 issues.

Screen Shot 2021 01 06 At 11 27 30 AMHenry J. Jansen, P.Eng. ACCI.

President of Criterium-Jansen Engineers and CCI-GR Board of Directors


More To Explore

Condo Life is Grand

Make Sure Your Winter is a Grand Ol’ Time

You can probably use one hand to count all the people you know who love the winter season.  For the rest of us, finding the motivation to do any activities

Condo Life is Grand

Hands Up If You Know Where Your Agenda Is

Does anyone else feel like New Year’s was simultaneously yesterday AND six months ago?  We’re currently in that dark period. After the December holidays, and before spring, when leaving the

PHP Code Snippets Powered By : XYZScripts.com